Generating the Correct PV_INFO file for your Power Vision 3 and Power Vision CX

Follow

To supply you with a tune for your specific vehicle, we first must have your PV_Info file.

For PVCX

  1. Plug the PVCX into your vehicles diagnostic power and turn the ignition/power switch on, but do not start.
  2. Once the PVCX is powered up and connected, press the top button.
  3. Select Device Tools > Device Info > About.
  4. The screen below will show you various information about the PVCX, but we want the vehicle info. To access this, select the “pencil icon.” A dialog should pop up and say "File Created."power-vision-pv-info-generation-steps.png
  5. Turn the ignition/power switch off and unplug the PVCX from the vehicle
  6. Use the following link to check if we have any available tunes for your vehicle. Click here to check for Tunes
  7. If yes, download Tunes and use as desired. 
  8. If not, please send us the PV_INFO.txt file so we can create a Tune for your vehicle. Click this to access send the form

 

For PV

  1. Plug the PV into your vehicles diagnostic power and turn the ignition/power switch on, but do not start.
  2. Use the following link to check if we have any available tunes for your vehicle. 
  3. If yes, download and as use desired. 
  4. If not, please send us the PV_INFO.txt file so we can create a tune for your vehicle. Click this to access send the form

 

 

Was this article helpful?
5 out of 14 found this helpful

Comments

0 comments

Please sign in to leave a comment.