Most Power Commanders are powered by the injectors on the bike. When you turn the key on, the fuel pump gets power and primes the fuel circuit. When this happens, the injectors get power, and the Power Commander also gets power and lights up. After a few moments, the fuel pump has pressurized the system, and usually shuts off. If the fuel pump shuts off, the injectors’ loose power, and the Power Commander shuts off. If you attempt to start the bike when the Power Commander is off, the bike will NOT start, until the fuel pump comes back on. The fuel pump may come on instantly, after a few engine revolutions, or on some bikes seemingly not at all. If the fuel pump does not come on, the bike will not start. We recommend starting the bike once you turn the key on. Do not wait for the fuel pump to shut off, or a check engine light to go out.
Articles in this section
- Why doesn’t Dynojet offer tunes for snowmobiles?
- What is Knock, Detonation, and Pre-ignition?
- If I live in the United States can I use one of the European maps?
- On my Harley Touring model once in a while my cruise control and 6th gear light will stop working.
- I ride a lot in the rain. Do I need to wrap my Power Commander in a plastic bag?
- I have had a Power Commander on my bike for quite a while and it has been running great. One day it just started running rough (like it was a cylinder was misfiring) so I disconnected the Power Commander and it went away. What could be the problem with th
- If I disconnect my battery will the Power Commander lose it's map?
- I am having trouble starting the engine when the Power Commander is installed.
- My engine makes a popping noise on deceleration, how to I get rid of this?
- File and Power Commander version incompatible error appears when I try to load a map